Attaching the TINKERplate to the Raspberry Pi

The TINKERplate comes packaged with a set of screws and standoffs that allow for easy attachment to the Raspberry Pi. Carefully remove these from the antistatic bag and ensure that there are four of each piece. Then follow the steps below to assemble your TINKERplate:

Step 1 - extract and identify parts

 

Step 2 - attach spacers to the standoffs on the four mounting holes on the Rasperry Pi

 

Step 3 - carefully align the connector on TINKERkit with the pins on the Raspberry Pi and then push it down until it aligns with the standoffs

 

Secure the TINKERplate to the standoffs with the four, 6mm M2.5 screws. These do not have to be too tight.

The completed assembly on an RPi4